micchem

Influence of polyethylene terephthalate/ polyamide (PET/PA) bilayer structure on physical and strength-related properties of superpressure angioplasty balloons

 

Background: Percutaneous transluminal coronary angioplasty (PTCA), together with balloon angioplasty, is a regular scientific invasive therapy for coronary artery illness. The coronary lesion with calcification is tough to dilate and the prevention of balloon failure is particularly vital.

 

Goal: A novel superpressure balloon was fabricated with bilayered construction of polyethylene terephthalate (PET) and PA12 (polyamide).

 

Strategies: The buildings of bilayer balloon had been adjusted to attain total glorious efficiency. Physicochemical, thermal and mechanical properties of bilayer balloons had been characterised by X-ray diffraction, differential scanning calorimeter, hydraulic tester and theoretical simulation.

 

Outcomes: In contrast with pure PA12 and PET balloons, PA12 outer layer: PET inside layer balloon with layer ratio of three:7 reveals the best burst stress and comparatively low compliance on account of a rise in crystallinity and orientation.

 

Conclusions: The produced bilayer balloon proved to own a small folding dimension because of its ultrathin bilayer construction, which is sweet for crossing cramped vessels. We imagine these optimally fabricated bilayer balloons are proved to offer enticing alternatives for preparation, efficiency enhancement, and sensible functions of super-pressure balloon catheters and cryoablation balloons, that may considerably promote the event of percutaneous transluminal coronary angioplasty for scientific functions.

Supplemental Creatine Modified With Polyethylene Glycol Successfully Hundreds Skeletal Muscle With Decrease Doses

 

Fry, AC, Parra, ME, and Cabarkapa, D. Supplemental creatine modified with polyethylene glycol successfully hundreds skeletal muscle with decrease doses. J Energy Cond Res 35(5): 1256-1261, 2021-The aim of this examine was to match the efficacy of skeletal muscle uptake of creatine monohydrate (Cr H2O) with that of creatine sure to polyethylene glycol (Cr PEG). Wholesome males (X ± SE; age = 23.5 ± 1.Zero years) had been divided into management (Con, n = 9, 20 g·d-1 of Cr H2O) and experimental (Exp, n = 8, 10 g·d-1 of Cr PEG) teams. Blood samples and muscle biopsies had been used to find out acute gastrointestinal absorption over 5 hours and muscle mobile uptake over 5 days. Each teams exhibited considerably (p < 0.05) elevated concentrations of muscle-free Cr (M·gdw-1; Con, pre = 23.0 ± 4.2, submit = 39.2 ± 2.7; Exp pre = 22.1 ± 2.9, submit = 33.6 ± 3.2), whole Cr (M·gdw-1, Con pre = 94.7 ± 5.4, submit = 114.8 ± 7.4; Exp pre = 92.6 ± 5.4, submit = 106.6 ± 8.4), which had been additionally elevated when these values had been normalized for adenosine triphosphate utilizing molar ratios.

Circulatory uptake of Cr was considerably totally different between the teams, with blood concentrations (mg·dL-1) for the Con group peaking at 2 hours post-ingestion (25.99 ± 2.96), whereas the concentrations for the Exp group had been decrease and had been nonetheless rising at 5 hours (4.05 ± 0.87). The built-in space underneath the curve for the 5-hour postingestion interval was 7-fold larger for the Con group. Though whole Cr ingested over the 5 days supplementation interval was much less for the Cr PEG group, skeletal muscle uptake of Cr PEG was just like Cr H2O. Primarily based on circulating Cr concentrations, evidently Cr PEG is cleared extra slowly from the gastrointestinal tract. Thus, decrease dosages of Cr could also be ingested whereas sustaining optimum loading kinetics.

Polyethylene microplastics enhance cadmium uptake in lettuce (Lactuca sativa L.) by altering the soil microenvironment

 

Little analysis has centered on the mixed air pollution of microplastics (MPs) and heavy metals in soil, particularly the mechanism of their interplay. We performed a 45-day microcosm experiment to check the speculation that polyethylene (PE) MPs and cadmium (Cd) had a joint toxicity to lettuce health. The consequences of MPs at totally different addition ratios on Cd bioavailability and soil properties had been additionally investigated within the microenvironment of three ranges of Cd-contaminated soils. The outcomes confirmed that the 10% MPs had an antagonistic influence on the plant biomass and considerably decreased soil pH and cation alternate capability (CEC), however considerably elevated soil dissolved natural carbon (DOC).

The presence of MPs elevated the soil Cd bioavailability and plant Cd concentrations and accumulations throughout all three ranges of Cd-contaminated soils, which doubtlessly aggregated the mixed toxicity. The quantities of the bacterial 16SRNA and the fungal ITSRNA genes displayed a hormesis impact in response to the MP addition ratios whereas the abundance of Cd resistance genes cadA and czcA elevated throughout all three Cd ranges. The regression path evaluation indicated that MPs affected shoot Cd concentrations by altering soil properties, which immediately and not directly contributed to the alteration mechanism, whereas the soil pH, DOC, and Cd bioavailability performed core roles. The outcomes recommend that the co-exposure of PE MPs in heavy metal-contaminated soil might due to this fact enhance the toxicity, uptake, accumulation, and bioavailability of heavy metals by altering the properties of the soil microenvironment, which deserves additional analysis.

micchem
micchem

Progressive high-density polyethylene/waste glass powder composite with outstanding mechanical, thermal and recyclable properties for technical functions

 

A number of reinforcement supplies are integrated right into a polymeric matrix to enhance the mechanical properties and scale back the price of the obtained composites. On this work, recycled high-density polyethylene/waste glass powder composites, compatibilized with maleic anhydride-grafted polyethylene, had been ready utilizing a two-roll mill and compression molding methods. 4 ranges of waste glass powder, 2, 10, 20 and 30% by weight, and 5 ranges of the compatibilizer, polyethylene grafted with maleic anhydride (0.5, 1.5, 2.5, 5 and seven.5percentby weight), had been used.

The impact of including waste glass powder and compatibilizer focus on the composite’s mechanical properties, comparable to tensile energy, tensile pressure, tensile modulus and thermal properties was studied. The outcomes confirmed that superior mechanical properties had been obtained and that the tensile energy and modulus elevated with growing waste glass powder content material and compatibilizer focus by 20 and 1.5 wt%, respectively.

Nonetheless, the elongation on the break decreased with the rise in each components. The composite, which was ready underneath ultimate circumstances, has excessive thermal stability and might be simply recycled and reprocessed for 5 cycles with excessive mechanical properties. This examine recommends that the ready composite, underneath optimum circumstances, can be utilized as a cheap car dashboard materials.

Adsorption-desorption conduct of methylene blue onto aged polyethylene microplastics in aqueous environments

 

On this examine, polyethylene microplastics had been artificially photoaged by xenon mild. Experiments had been then carried out with methylene blue (MB) dye to match the modifications within the construction, properties, and adsorption-desorption behaviors of the aged and virgin polyethylene microplastics. The outcomes confirmed that the aged polyethylene microplastics had been hydrophilic with oxygen-containing purposeful teams, which enhanced the adsorption capability of polyethylene for MB from 0.63 mg·g-1 to eight.12 mg·g-1.

The adsorption isotherms modified from the Henry mannequin (virgin polyethylene microplastics) to the Langmuir mannequin (aged polyethylene microplastics), indicating that the partitioning perform was progressively changed by a single-layer protecting throughout the adsorption course of. As well as, 7% and 17.8% of the MB loaded onto the aged polyethylene microplastics was desorbed into water and a simulated intestinal fluid, respectively. These findings reveal that aged polyethylene microplastics can accumulate MB, thus posing potential dangers to aqueous environments and organic tissues.

Polyethylene glycol 6000

GC2342-1KG 1 kg
EUR 62

Polyethylene glycol 6000

GC2342-500G 500 g
EUR 49

PEG 6000 (Polyethylene glycol)

PB0432 500g
EUR 63.05
  • Product category: Biochemicals/Biology Reagents/Other

Polyethylene Glycol (PEG)

abx085411-335kDa55kg 3.35 kDa; 5.5 kg
EUR 244
  • Shipped within 5-10 working days.

Polyethylene glycol 4000

GX6931-100G 100 g
EUR 44

Polyethylene glycol 4000

GX6931-1KG 1 kg
EUR 62

Polyethylene glycol 4000

GX6931-500G 500 g
EUR 49

Polyethylene glycol 1000

GC0081-100G 100 g
EUR 46

Polyethylene glycol 8000

GC0902-100G 100 g
EUR 48

Polyethylene glycol 8000

GC0902-1KG 1 kg
EUR 77

Polyethylene glycol 8000

GC0902-500G 500 g
EUR 62

Polyethylene glycol 400

GC3481-100G 100 g
EUR 41

Polyethylene glycol 400

GC3481-1KG 1 kg
EUR 65

Polyethylene glycol 400

GC3481-250G 250 g
EUR 46

Polyethylene glycol 400

GC3481-500G 500 g
EUR 53

Polyethylene glycol 400

GC3481-5KG 5 kg
EUR 153

Polyethylene glycol 300

GC9998-100G 100 g
EUR 40

Polyethylene glycol 300

GC9998-1KG 1 kg
EUR 62

Polyethylene glycol 300

GC9998-250G 250 g
EUR 44

Polyethylene glycol 300

GC9998-500G 500 g
EUR 52

Polyethylene glycol 300

GC9998-5KG 5 kg
EUR 142

Polyethylene glycol 1500

GK2627-100G 100 g
EUR 44

Polyethylene glycol 1500

GK2627-1KG 1 kg
EUR 62

Polyethylene glycol 1500

GK2627-500G 500 g
EUR 49

Polyethylene Glycol (PEG) Antibody

abx021053-100ug 100 ug
EUR 871
  • Shipped within 5-10 working days.

Polyethylene Glycol (PEG) Antibody

abx021054-100ug 100 ug
EUR 871
  • Shipped within 5-10 working days.

Polyethylene Glycol (PEG) Antibody

20-abx132170
  • EUR 439.00
  • EUR 133.00
  • EUR 1261.00
  • EUR 606.00
  • EUR 328.00
  • 100 ug
  • 10 ug
  • 1 mg
  • 200 ug
  • 50 ug
  • Shipped within 5-7 working days.

PEG 4000 (Polyethylene glycol)

PB0431 500g
EUR 63.05
  • Product category: Biochemicals/Biology Reagents/Other

PEG 8000 (Polyethylene glycol)

PB0433 500g
EUR 63.05
  • Product category: Biochemicals/Biology Reagents/Other

Polyethylene Glycol (PEG) Antibody (Biotin)

abx021052-005mg 0.05 mg
EUR 815
  • Shipped within 5-10 working days.

Polyethylene Glycol (PEG) ELISA Kit

20-abx258764
  • EUR 7973.00
  • EUR 4246.00
  • EUR 981.00
  • 10 × 96 tests
  • 5 × 96 tests
  • 96 tests
  • Shipped within 5-7 working days.

BSA Conjugated Polyethylene Glycol (PEG)

4-CPX163Ge11
  • EUR 413.60
  • EUR 214.00
  • EUR 1276.00
  • EUR 492.00
  • EUR 884.00
  • EUR 340.00
  • EUR 3040.00
  • 100 ug
  • 10ug
  • 1 mg
  • 200 ug
  • 500 ug
  • 50ug
  • 5 mg
  • Uniprot ID: Inquire
  • Buffer composition: PBS, pH 7.4.
  • Form: Freeze-dried powder
  • Predicted Molecular Mass (KD): 62.1Da
  • Isoelectric Point: Inquire
Description: Recombinant Pan-species Polyethylene Glycol expressed in: E.coli

OVA Conjugated Polyethylene Glycol (PEG)

4-CPX163Ge21
  • EUR 413.60
  • EUR 214.00
  • EUR 1276.00
  • EUR 492.00
  • EUR 884.00
  • EUR 340.00
  • EUR 3040.00
  • 100 ug
  • 10ug
  • 1 mg
  • 200 ug
  • 500 ug
  • 50ug
  • 5 mg
  • Uniprot ID: Inquire
  • Buffer composition: PBS, pH 7.4.
  • Form: Freeze-dried powder
  • Predicted Molecular Mass (KD): 62.1Da
  • Isoelectric Point: Inquire
Description: Recombinant Pan-species Polyethylene Glycol expressed in: E.coli

Polyethylene Glycol (PEG) Protein (BSA)

20-abx651925
  • EUR 578.00
  • EUR 258.00
  • EUR 1720.00
  • EUR 690.00
  • EUR 425.00
  • 100 ug
  • 10 ug
  • 1 mg
  • 200 ug
  • 50 ug
  • Shipped within 5-7 working days.

Polyethylene Glycol (PEG) Protein (OVA)

20-abx651926
  • EUR 578.00
  • EUR 258.00
  • EUR 1720.00
  • EUR 690.00
  • EUR 425.00
  • 100 ug
  • 10 ug
  • 1 mg
  • 200 ug
  • 50 ug
  • Shipped within 5-7 working days.

Polyethylene Glycol (PEG) CLIA Kit

20-abx490560
  • EUR 9242.00
  • EUR 4920.00
  • EUR 1130.00
  • 10 × 96 tests
  • 5 × 96 tests
  • 96 tests
  • Please enquire.

General Polyethylene Glycol (PEG) ELISA Kit

CEX163Ge-10x96wellstestplate 10x96-wells test plate
EUR 6040.5
  • The Intra-assay Precision is determined when 3 samples with low, middle and high level of General Polyethylene Glycol (PEG) were tested on 3 different plates, 8 replicates in each plate
  • CV(%) = SD/meanX100
  • Intra-Assay: CV<10%
  • Inter-Assay: CV<12%
Description: This is Competitive Enzyme-linked immunosorbent assay for detection of General Polyethylene Glycol (PEG) in serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids.

General Polyethylene Glycol (PEG) ELISA Kit

CEX163Ge-1x48wellstestplate 1x48-wells test plate
EUR 585.1
  • The Intra-assay Precision is determined when 3 samples with low, middle and high level of General Polyethylene Glycol (PEG) were tested on 3 different plates, 8 replicates in each plate
  • CV(%) = SD/meanX100
  • Intra-Assay: CV<10%
  • Inter-Assay: CV<12%
Description: This is Competitive Enzyme-linked immunosorbent assay for detection of General Polyethylene Glycol (PEG) in serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids.

General Polyethylene Glycol (PEG) ELISA Kit

CEX163Ge-1x96wellstestplate 1x96-wells test plate
EUR 793
  • The Intra-assay Precision is determined when 3 samples with low, middle and high level of General Polyethylene Glycol (PEG) were tested on 3 different plates, 8 replicates in each plate
  • CV(%) = SD/meanX100
  • Intra-Assay: CV<10%
  • Inter-Assay: CV<12%
Description: This is Competitive Enzyme-linked immunosorbent assay for detection of General Polyethylene Glycol (PEG) in serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids.

General Polyethylene Glycol (PEG) ELISA Kit

CEX163Ge-5x96wellstestplate 5x96-wells test plate
EUR 3268.5
  • The Intra-assay Precision is determined when 3 samples with low, middle and high level of General Polyethylene Glycol (PEG) were tested on 3 different plates, 8 replicates in each plate
  • CV(%) = SD/meanX100
  • Intra-Assay: CV<10%
  • Inter-Assay: CV<12%
Description: This is Competitive Enzyme-linked immunosorbent assay for detection of General Polyethylene Glycol (PEG) in serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids.

General Polyethylene Glycol (PEG) ELISA Kit

4-CEX163Ge
  • EUR 6091.00
  • EUR 3219.00
  • EUR 794.00
  • 10 plates of 96 wells
  • 5 plates of 96 wells
  • 1 plate of 96 wells
  • Known also as Polyethylene Glycol elisa. Alternative names of the recognized antigen: PEO
  • POE
  • Polyethylene oxide
  • Polyoxyethylene
  • Carbowax
  • GoLYTELY
  • GlycoLax
  • Fortrans
  • TriLyte
  • Colyte
  • Halflytely
  • Macrogol
  • MiraLAX
  • MoviPrep
Description: Enzyme-linked immunosorbent assay based on the Competitive Inhibition method for detection of General Polyethylene Glycol (PEG) in samples from serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids with no significant corss-reactivity with analogues from other species.

D-alpha-Tocopherol polyethylene glycol succinate

GK2339-25G 25 g
EUR 150

D-alpha-Tocopherol polyethylene glycol succinate

GK2339-5G 5 g
EUR 70

General Polyethylene Glycol ELISA Kit (PEG)

RK00701 96 Tests
EUR 573

High Sensitivity Polyethylene Glycol (PEG) ELISA Kit

DEIA6158 96T
EUR 1165
Description: High Sensitivity Polyethylene Glycol (PEG) ELISA Kit is High Sensitivity ELISA for the Measurement of PEG and PEGylated Proteins.

ELISA kit for General PEG (Polyethylene Glycol)

ELK8264 1 plate of 96 wells
EUR 372
  • A monoclonal antibody specific to Polyethylene Glycol (PEG) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between biotin labeled Polyethylene Glycol (PEG) and unlabeled Polyethylene Glycol (PEG) (Standards or sa
  • Show more
Description: A competitive Inhibition ELISA kit for detection of Polyethylene Glycol from General in samples from blood, serum, plasma, cell culture fluid and other biological fluids.

Polyethylene Glycol (PEG) Polyclonal Antibody (Pan-species)

4-PAX163Ge01
  • EUR 253.00
  • EUR 2615.00
  • EUR 649.00
  • EUR 319.00
  • EUR 217.00
  • 100ul
  • 10ml
  • 1ml
  • 200ul
  • 20ul
  • Sequence of the immunogen: Inquire for antigen sequence.
  • Buffer composition: 0.01M PBS, pH7.4, containing 0.05% Proclin-300, 50% glycerol.
Description: A Rabbit polyclonal antibody against Pan-species Polyethylene Glycol (PEG)

Polyethylene Glycol (PEG) Polyclonal Antibody (Pan-species), APC

4-PAX163Ge01-APC
  • EUR 355.00
  • EUR 3419.00
  • EUR 948.00
  • EUR 454.00
  • EUR 224.00
  • 100ul
  • 10ml
  • 1ml
  • 200ul
  • 20ul
  • Sequence of the immunogen: Inquire for antigen sequence.
  • Buffer composition: 0.01M PBS, pH7.4, containing 0.05% Proclin-300, 50% glycerol.
Description: A Rabbit polyclonal antibody against Pan-species Polyethylene Glycol (PEG). This antibody is labeled with APC.

Polyethylene Glycol (PEG) Polyclonal Antibody (Pan-species), Biotinylated

4-PAX163Ge01-Biotin
  • EUR 318.00
  • EUR 2565.00
  • EUR 753.00
  • EUR 391.00
  • EUR 222.00
  • 100ul
  • 10ml
  • 1ml
  • 200ul
  • 20ul
  • Sequence of the immunogen: Inquire for antigen sequence.
  • Buffer composition: 0.01M PBS, pH7.4, containing 0.05% Proclin-300, 50% glycerol.
Description: A Rabbit polyclonal antibody against Pan-species Polyethylene Glycol (PEG). This antibody is labeled with Biotin.

Polyethylene Glycol (PEG) Polyclonal Antibody (Pan-species), Cy3

4-PAX163Ge01-Cy3
  • EUR 432.00
  • EUR 4517.00
  • EUR 1223.00
  • EUR 564.00
  • EUR 257.00
  • 100ul
  • 10ml
  • 1ml
  • 200ul
  • 20ul
  • Sequence of the immunogen: Inquire for antigen sequence.
  • Buffer composition: 0.01M PBS, pH7.4, containing 0.05% Proclin-300, 50% glycerol.
Description: A Rabbit polyclonal antibody against Pan-species Polyethylene Glycol (PEG). This antibody is labeled with Cy3.

Polyethylene Glycol (PEG) Polyclonal Antibody (Pan-species), FITC

4-PAX163Ge01-FITC
  • EUR 304.00
  • EUR 2755.00
  • EUR 778.00
  • EUR 383.00
  • EUR 199.00
  • 100ul
  • 10ml
  • 1ml
  • 200ul
  • 20ul
  • Sequence of the immunogen: Inquire for antigen sequence.
  • Buffer composition: 0.01M PBS, pH7.4, containing 0.05% Proclin-300, 50% glycerol.
Description: A Rabbit polyclonal antibody against Pan-species Polyethylene Glycol (PEG). This antibody is labeled with FITC.

Polyethylene Glycol (PEG) Polyclonal Antibody (Pan-species), HRP

4-PAX163Ge01-HRP
  • EUR 324.00
  • EUR 2979.00
  • EUR 838.00
  • EUR 410.00
  • EUR 210.00
  • 100ul
  • 10ml
  • 1ml
  • 200ul
  • 20ul
  • Sequence of the immunogen: Inquire for antigen sequence.
  • Buffer composition: 0.01M PBS, pH7.4, containing 0.05% Proclin-300, 50% glycerol.
Description: A Rabbit polyclonal antibody against Pan-species Polyethylene Glycol (PEG). This antibody is labeled with HRP.

Polyethylene Glycol (PEG) Polyclonal Antibody (Pan-species), PE

4-PAX163Ge01-PE
  • EUR 304.00
  • EUR 2755.00
  • EUR 778.00
  • EUR 383.00
  • EUR 199.00
  • 100ul
  • 10ml
  • 1ml
  • 200ul
  • 20ul
  • Sequence of the immunogen: Inquire for antigen sequence.
  • Buffer composition: 0.01M PBS, pH7.4, containing 0.05% Proclin-300, 50% glycerol.
Description: A Rabbit polyclonal antibody against Pan-species Polyethylene Glycol (PEG). This antibody is labeled with PE.

Polyethylene glycol 4000, BP, Ph. Eur., USP/NF grade

GC0009-1KG 1 kg
EUR 68

Polyethylene glycol 300, BP, Ph. Eur., USP/NF grade

GC0220-1L 1 l
EUR 74

Polyethylene glycol 400, BP, Ph. Eur., USP/NF grade

GC0231-1L 1 l
EUR 66

Polyethylene glycol 8000, BP, Ph. Eur., USP/NF grade

GC2100-1KG 1 kg
EUR 79

Polyethylene Glycol (PEG) Polyclonal Antibody (Pan-species), APC-Cy7

4-PAX163Ge01-APC-Cy7
  • EUR 590.00
  • EUR 6718.00
  • EUR 1777.00
  • EUR 788.00
  • EUR 328.00
  • 100ul
  • 10ml
  • 1ml
  • 200ul
  • 20ul
  • Sequence of the immunogen: Inquire for antigen sequence.
  • Buffer composition: 0.01M PBS, pH7.4, containing 0.05% Proclin-300, 50% glycerol.
Description: A Rabbit polyclonal antibody against Pan-species Polyethylene Glycol (PEG). This antibody is labeled with APC-Cy7.

PEG 6000

abx082166-500g 500 g
EUR 203
  • Shipped within 5-10 working days.

Apa I unit: 6000

YRAPA1 1 vial Ask for price

Propranolol glycol

B6474-100 100 mg
EUR 268

Diethylene glycol

abx184672-5g 5 g
EUR 189
  • Shipped within 1-2 weeks.

Ethylene glycol

20-abx184690
  • EUR 217.00
  • EUR 509.00
  • EUR 189.00
  • EUR 370.00
  • EUR 175.00
  • 100 g
  • 1 kg
  • 25 g
  • 500 g
  • 5 g
  • Shipped within 1-2 weeks.

Hexylene glycol

HY-B0903 100mg
EUR 119

Glycol salicylate

HY-B2208 5g
EUR 119

Dipropylene glycol

GD3668-100G 100 g
EUR 46

Dipropylene glycol

GD3668-250G 250 g
EUR 50

Dipropylene glycol

GD3668-25G 25 g
EUR 42

Tetraethylene glycol

GK2619-100G 100 g
EUR 48

Diethylene glycol

GK2667-100ML 100 ml
EUR 42

Ethylene glycol

GK7641-100ML 100 ml
EUR 38

Ethylene glycol

GK7641-1L 1 l
EUR 54

Ethylene glycol

GK7641-500ML 500 ml
EUR 44

Ethylene glycol

GK7641-5L 5 l
EUR 114

Triethylene glycol

HY-W017440 100mg
EUR 108

Leave a Reply

Your email address will not be published. Required fields are marked *