|
Decorative Film
Formable Plastic Film
A mirror surface film for insertion molding
and for heat molding to which complex processes are applied using
LCS (Laminate Calendar System) technology, which represents original
technology in mirror surface processing. This pre-colored film provides
a mirror-finished molding with a luxury appearance, eliminating
the need for mirror-finishing by color coating after molding.
Characteristics
Excellent UV Ray resistant and scratch resistant.
There is no change in the glossiness after
molding, because of an excellent feature
of the heat resistant mirror surface that results
in maintaining a high grade and a fresh,
neat impression.
High formability.
Adhesion of resin film in the lowest layer
to the injection molding resin is excellent.
| Characteristics |
| Properties |
Unit |
Typical Value |
Testing Method |
| Tensile Strength |
N cm2 |
TD 4700
MD 4500 |
ASTMD-638 |
| Tensile Elongation |
% |
TD 10
MD 13 |
ASTMD-638 |
Heating Shrinkage
(100°C x 1hour) |
% |
TD-4
MD 0.1 |
|
| Impact Resistant |
|
10¤10 |
DuPont style impact H:10cm,
Weight:300g |
| Pencil Hardness |
|
HB |
JIS K 5400 |
Chemical Resistance
Alkali
Acid
DOP
Bulla Pass
Cattle Fat
Kerosene |
|
No change
No change
No change
Swelling
No change
No change |
1¤10 N Sodium hydroxide 55°C x
4 hours
1¤10 N Sulfuric acid 20°C x
24 hours
Room temperature x 24 hours
Room temperature x 24 hours |
| Heat Resistance |
|
No change |
80°C x 400 hours |
| Humidity Resistance |
|
No change |
50°C x 95% RH x 250
hours |
| Heating and Cooling Cycle
Test |
|
No change |
-30°C 80°C 50°C
x 95% RH |
| Weather Resistance |
|
No change |
Black panel ; 83°C
x 800 hours |
|
| Product
Standards |
| |
Thickness (mm) |
Width (mm) |
Roll (m) |
Uses |
| Standard Specs |
0.35 |
1040 |
50 |
Insert-injection molding |
| Basic Specs
|
0.2-0.5 |
1040 |
50~100 |
Insert-injection molding |
| 0.6~2.0 |
1040 |
|
|
|
Avoid direct sunlight, high temperature, and high
humidity. Please keep film in a cool and dark place.
A) If film is left unsealed for a long time, the quality may change
drastically as a result of moisture absorption. Please make sure
to seal tightly when storing the film.
B) A protective film is attached to prevent damage and dust from
harming film.
C) Please notice that quality of film may change drastically if
this product is immersed in a solvent.
|
